Bitte beachten Sie, dass Sie zur Verwendung unserer Runtime außerhalb des 2-stündigen Demo-Moduses eine applikationsbasierte Lizenz benötigen. Weitere Informationen zu den applikationsbasierten Lizenzen finden Sie hier.

CODESYS Control for PFC100 SL

Das Produkt ermöglicht dem Endanwender die Programmierung einer WAGO PFC100-Steuerung mit der kostenlosen Entwicklungsumgebung CODESYS Development System (V3).

Aktuelle Version
4.11.0.0
Artikelnummer
2302000019-SW
0,00 €
Zzgl. Mehrwertsteuer
License Agreement

 

for the usage of a CODESYS Software or CODESYS Software Package

 

General Terms of License (End User License Agreement) for the supplied Software. Please read this Software User Agreement carefully before using the supplied Software. Downloading or installation of the Software constitutes recognition by the customer of the conditions of this Agreement.

The following conditions are agreed between you as the software user and the company 3S-Smart Software Solutions GmbH (hereinafter referred to as 3S), 87439 Kempten (Germany) and are legally binding.

With this license agreement, you acquire the permission of use for Software from 3S (e. g. http://codesys.com, http://store.codesys.com). Some products may only be used for a limited period of time (Products with the name affix “Abo”, “Abonnement” or “Subscription”). If you do not agree to the following license agreement, then you, the user, are not permitted to save and/or install the Software. Should you have already installed the Software, and you do not agree to the license agreement, then immediately delete or uninstall the Software.

§ 1       Object of the License Agreement

The object of the License Agreement is the supplied Software that you have received either directly or from the CODESYS Store. With the provided Software, the user is in the position to use and/or to extend the CODESYS Development System and/or implement a CODESYS runtime environment on a specific programmable logic controller (PLC), herein termed "device". The user has the right to install the functions of the Software after installation of the device software and/or the CODESYS Development System.

In this way, the user can use the functions as specified in the data sheet of the Software.

§ 2       Geographic Restriction

None

§ 3       Rights of Use

Different license models grant different usage rights. A CODESYS Softcontainer or CODESYS Key (hardware dongle) is required to use the demo, full or time license.

Free: Software that is indicated as "Free" in the CODESYS Store is not subject to an automatic license check by the manufacturer and can be used free of charge.

Demo: The user can order a simple and non-transferable demo license to the supplied Software, depending on availability. The license protected demo software is free of charge but limited by time and/or functionality.

Full: The provided Software is protected by license and requires a fee. The user acquires an unrestricted, simple, and non-transferable license to use the supplied Software with no restrictions.

Time license: Alternatively, a time-limited license is offered to the user, with which the user acquires a simple, non-transferable license to use the delivered software for an agreed, contiguous period.

It is not permitted to edit, modify, disassemble or decompile the Software or to use other processes of reverse engineering to by-pass the licensing mechanism, or to have these processes performed by third parties, insofar as this is not absolutely required for exploiting the rights that result from licenses in all events for open source components.

The Software can be components that are licensed as open source software. For these components, the contents of the respective open source licenses apply, as also stored in the Software. The list of components with the terms and conditions of license are available for reading before purchase and are also included in the Software. The licensee receives a simple rights of use from the respective right holders for using the open source software under the conditions as provided for it by the respective valid license terms. The provided license terms apply to only the components that are not licensed as open source software.

All rights regarding the usage and exploitation of the software and Software remain reserved to 3S.

§ 4       Warranty

4.1.    The manufacturer warrants that the installed Software will substantially conform to its documentation or data sheet. The following restrictions shall apply. In particular, there is no warranty that the Software fulfills the specific requirements of the user, serves his specific purpose and works together with all the other programs selected by the user, in so far as interfaces to these programs have not been agreed upon in writing.

4.2.    It is deemed to be agreed and the user recognizes and accepts that, according to the current state of knowledge and technology, it is not possible to create software in such a way that it works without errors or faults under all application conditions. A deviation from the agreed properties of the Software can only be considered significant if normal operation is substantially disrupted. If a disruption occurs under exceptional circumstances, this cannot be considered as a deviation from the agreed properties of the Software. 

4.3.    The user shall immediately examine the Software supplied, shall establish its appropriateness for the intended purpose and shall immediately issue complaints about initial or non-initial errors/defects in detail and in such a way that the error/defect can be reproduced by the manufacturer. The user agrees to provide 3S with material giving information on the nature and occurrence of these errors/defects in order to contribute to their localization and correction. The user bears sole responsibility for the selection, installation and use of the Software, as well as for the intended results thereof.

4.4.    The manufacturer does not provide a warranty for errors or defects that are caused by or result from the following circumstances:

(a)     Incorrect or insufficient maintenance or parameterization

(b)     Operation outside the software’s specification

(c)     Incorrect preparation and/or maintenance of the installation location

(d)     Interaction with hardware or software not released by the manufacturer

A special guarantee which could result in additional rights is not provided.

4.5.    Any defects with regard to the supplied Software (including defects with regard to the program description and any other documents provided along with the Software), will be rectified by the manufacturer within an appropriate period of time. The manufacturer has the right to decide between rework/repair free of charge or replacement at its own discretion.

4.6     The conditions for liability and warranty in these license terms are valid for the complete Software with respect to the manufacturer. The liability and warranty conditions of the open source licenses are valid between the user and the open source right holders.

§ 5       Limitation of Liability

The Software can be used for numerous applications. The user shall decide independently whether or not it is also appropriate for the actual intended application. After installation, the user is responsible for the Software functioning according to its specifications.

The manufacturer is liable for intentional acts and gross negligence. The manufacturer shall be liable for slight negligence only if this involves the breach of a major obligation deemed essential for the purpose of the contract (cardinal obligation) and the fulfillment of which the customer may regularly rely upon or for damages resulting from injury to life body or health. The manufacturer is obliged to act with due diligence.

Upon the determination of whether the manufacturer has culpability, it is to be considered that, as a matter of fact, it is not possible to provide software on an error-free basis. For events of slight negligence, total liability is limited to the amount of the foreseeable damage, the occurrence of which must typically be expected; however, the maximum of such liability arising from the contractual relationship is limited to a total of EURO 100,000.00. The manufacturer shall not be liable for other damages, consequential damages, or lost profits.

The preceding provisions also apply in favour of any vicarious agent of the manufacturer. Liability under product liability law remains unaffected. For the loss of data and/or programs, the manufacturer is not liable insofar the damages are based on the fact that the user refrained from conducting data security measures and thereby ensuring that the lost data could be restored with a justifiable expense. Before commissioning the device and an application written with the CODESYS Development System, the user is obligated to perform sufficient tests in a safe environment.

§ 6       Termination

For non-time limited software this Agreement may be terminated at any time by uninstalling from the device the described Software from the manufacturer and destroying all copies thereof.

If the software is limited in time (subscription or subscription), the user agreement ends with the termination of the subscription or subscription on the expiry date of the agreed period of use. The termination of the time limited use can take place at any time, but must take place at the latest one month before the end of the expiration of the temporal limitation, in order to still be effective at the end of the current subscription period. If this does not take place or is done too late, the period of use is automatically extended by the period of the time limit agreed in the data sheet. After the end of the period of use, the functions of the software are no longer available or are only available to a very limited extent.

§ 7       Governing Law

This License Agreement shall be governed by the laws of the Federal Republic of Germany excluding CISG. The place of performance and the court of jurisdiction for all disputes arising from or in connection with this agreement is 87439 Kempten (Germany). Claims may also be asserted against each contracting party in its general place of jurisdiction.

 

 

§ 8       Severability Clause

Should one provision of this contract be or become invalid, or should the contract contain a gap, the validity of the remaining provisions shall remain unaffected. In place of the ineffective provisions, or in order to fill the gap, a provision shall apply which, in so far as legally viable, approaches the original intention of the contractual parties as closely as possible, or what can be assumed to have been their intention if they had considered the point in question.

Produktbeschreibung

CODESYS Control for PFC100 SL ist eine auf CODESYS V3 basierende SoftSPS für die Industriesteuerung WAGO PFC100. Die Steuerung kann nach der Installation der Laufzeitumgebung mit dem CODESYS Development System (V3) projektiert werden.

  • Download des Produktes „CODESYS Control for PFC100 SL“ aus dem CODESYS Store (http://store.codesys.com)

  • Installation der CODESYS-SoftSPS auf einem WAGO PFC100-Gerät (http://www.wago.com)

  • Austausch der WAGO-SPS-Laufzeitumgebung, wie sie im Lieferumfang von WAGO enthalten ist, gegen eine Standard-CODESYS-V3-kompatible SoftSPS

  • Konfiguration der Steuerung mit den WAGO-Softwarewerkzeugen

Nutzen

  • Geeignet für Steuerungen in den Branchen Factory Automation und Process Automation, mit neu definiertem Funktionsumfang der Steuerung

  • Umfangreiche Engineering-Lösung mit dem kostenlosen CODESYS Development System (V3), erweiterbar durch Add-ons aus dem CODESYS Store

  • Effizientes Engineering mit den Produkten der CODESYS Professional Developer Edition (Code Management über Apache Subversion-Anbindung, statische Codeanalyse, Laufzeitmessung auf der Steuerung, CODESYS Test Manager zur Testautomatisierung, methodische Applikationsentwicklung mit UML-Diagrammen)

  • Gleiche Leistungsfähigkeit und Zykluszeiten der Feldbus-Tasks wie beim OEM-Produkt, z. B. bei der Verwendung von lokalen I/O Modulen

Detaillierte Informationen finden Sie in der CODESYS Online Hilfe.

Schnittstellen

  • CODESYS OPC UA Server, als Vollversion zum Datenaustausch.

  • Unterstützung aller gängigen digitalen und analogen Ein- und Ausgangsmodule von WAGO (Liste zum Download im CODESYS Store verfügbar)

Visualisierung

  • CODESYS WebVisu, ist als Vollversion in der Lieferung des Runtime-Package enthalten.

SL Extension

Das SL Extension Package ist im Runtime-Package enthalten und bietet zusätzliche Funktionen:

  • Anbindung von bestehenden C Code

  • Implementierung von externen Funktionen

  • Unterstützung Start/Stop Schalter

  • Anbindung lokaler E/As

  • Verwendung von externen Eventtasks

  • Anbindung persistenter Speicher (Retains)

Funktionsumfang

Mit der Lieferung des Runtime-Package werden folgende Feldbusse unterstützt:

  • CODESYS CANopen Manager / Device (außer 750-8102 / -8112)

  • CODESYS EtherCAT Master

  • CODESYS EtherNet/IP Scanner / Adapter

  • CODESYS J1939

  • CODESYS Modbus TCP Master / Slave

  • CODESYS Modbus Serial Master / Slave (nur 750-8102 / -8112)

  • CODESYS PROFINET Controller / Device

Produktoptionen

Weitere Produkte können kostenpflichtig nachlizenziert werden:

  • CODESYS KNX SL

  • CODESYS Redundancy SL

Requirements

Programmiersystem

CODESYS Development System V3.5.17.0 oder höher

Unterstützte Plattformen/ Geräte

Alle Modelle der WAGO PFC100-Familie

Hinweis: Verwenden Sie das Tool “Device Reader”, um die von der Steuerung unterstützten Funktionen zu ermitteln (kostenloser Bestandteil des CODESYS Development Systems).

Zusätzliche Anforderungen

Siehe Lizenzvereinbarung. Nach der Installation ist der Anwender dafür verantwortlich, dass die Kombination aus Software-Paket und Hardware entsprechend seiner Gerätespezifikationen eingesetzt wird und funktioniert.

  • Minimale WAGO Firmware Version 17

  • Durch das CODESYS Control Runtime Binary benötigte dynamische Bibliotheken:

    • libm.so.6

    • libpthread.so.0

    • libdl.so.2

    • librt.so.1

    • libc.so.6

    • libgcc_s.so.1

    • libdbus-glib-1.so.2

    • libdbuskbuscommon.so.0

    • libffi.so.6

    • libglib-2.0.so.0

    • liblibloader.so.0

    • libnvram.so.0

    • libuio.so.0

    • liboms.so

    • libtypelabel.so

    • libdiagnostic.so

Einschränkungen

  • Hardwarespezifische Modellvariationen werden durch das Software Package nicht unterstützt.

  • Die Protokolle der Fernwirktechnik werden nicht unterstützt.

  • Nicht geeignet zum Einsatz in Containern oder virtuellen Maschinen (VMs)!

Lizenzierung

Einzelgerätelizenz: Die Lizenz kann auf der Steuerung, auf dem das CODESYS Laufzeitsystem installiert ist, verwendet werden.

Die Lizenzaktivierung erfolgt auf einem softwarebasierten Lizenz-Container (Soft-Container), der fest an die Steuerung gebunden ist. Alternativ kann die Lizenz auf einem CODESYS Key (USB-Dongle) hinterlegt werden. Durch Umstecken des CODESYS Keys kann die Lizenz auf einer anderen Steuerung genutzt werden.

Hinweis: Ohne Lizenz läuft die Software im Demomodus für zwei Stunden. Danach ist ein manueller Neustart erforderlich.

Erforderliches Zubehör

-

Support

No Support

Technischer Support ist bei diesem Produkt nicht enthalten. Um technischen Support zu erhalten, erwerben Sie bitte ein CODESYS Support Ticket.

 

Für allgemeine Fehlermeldungen oder Vertriebs-Anfragen vor dem Kauf verwenden Sie bitte direkt das Kontaktformular "Meine Frage", das auch ohne Login genutzt werden kann. Eine Liste mit alternativen Support-Ressourcen finden Sie im Support-Bereich der CODESYS Group-Webseite.

Lieferant

CODESYS GmbH

A member of the CODESYS Group

Memminger Straße 151
D-87439 Kempten
Germany

Versionen

Version History

Version Release Notes Release Date

With version 4.11.0.0 we updated to the latest CODESYS Runtime Toolkit V3.5. SP19 Patch 6

Includes the following Security fixes: 2023-11

23.02.2024

Major Features of new version

  • Update on CODESYS Runtime Toolkit V3.5.19.30

  • Update to CodeMeter V7.60c

  • Support of CODESYS DataSources

Includes the following Security fixes: 2023-05

31.10.2023
- 27.07.2023

Update on latest CODESYS Runtime Toolkit V3.5.19.0

Includes the following Security fixes: 2022-16

05.04.2023

Includes the following Security fixes: 2022-16

25.01.2023

Includes the following Security fixes: 2022-07

27.10.2022

Major Features of new version

  • Support of Extension SL Package

  • Update on CODESYS Runtime Toolkit V3.5.17.30

  • Update to CodeMeter V7.40

Includes the following Security fixes: 2022-09

30.06.2022

Major Features of new version

  • Support of Extension SL Package

  • Update on CODESYS Runtime Toolkit V3.5.17.30

  • Update to CodeMeter V7.40

01.03.2022

Support of Wagos Firmware Version 19

06.12.2021

Quality update with minor improvements and bug fixes.

  • Update to CODESYS Runtime Toolkit V3.5.17.10

  • Runtime update tool: Scan dialog should filter IP addresses of not relevant ranges

Includes the following Security fixes: 2021-09, 2021-11, 2021-12

01.09.2021

Main update with various improvements and bug fixes.

Important Note

To fix problems with installation of this software update start and use the CODESYS Installer (part of the CODESYS Development System setup v3.5.17.0) for package management.

New Features and Improvements

  • Update to CODESYS Runtime Toolkit V3.5.17.0
    • OPC UA Server extension for support of user-defined information models (OPC UA Companion Specifications)

    • Support of OPC UA methods and alarms & conditions

    • New service for management of runtime backups and updates

    • Activation of runtime user management by default, also see CODESYS Online Hilfe

  • Integration of “CODESYS Edge Gateway” as package dependency

  • New runtime options: CODESYS KNX SL and CODESYS BACnet SL (additional license required)

  • Support of the 750-1491 terminal

Compatiblity information

  • The “main configuration file” (CODESYSControl.cfg) are now marked as “writeprotected”. New and changed values will be written to the “user configuration file” (CODESYSControl_User.cfg).

  • SoftMotion device type is not needed anymore for motion applications. Standard device type can be used instead.

Known limitations

  • “PLC load watchdog” might not work as espected: the plc load watchdog will detect (e.g. an endless loop) but the IEC task might not be stopped in any case. This might lead to a complete stop of the runtime process. As workaround and improve “hardening” of your IEC application we recommend to use an IEC Task watchdog on all your relevant IEC tasks in your IEC application.

Includes the following Security fixes: 2020-05, 2021-01, 2021-04

16.06.2021

New features: - Update to CODESYS Runtime Toolkit V3.5.16.40 - Included linux packages for Edge Gateway - Add redundancy functionality (additional license required)

Bug Fixes: - Fixed licensing problems that may occur with newer hardware versions - Fixed problems with “Set Led”

04.03.2021

Quality update with minor improvements and bug fixes.

Includes support of WAGO-I/O-CHECK tool.

04.12.2020

Quality update with minor improvements and bug fixes. Includes fix for slow start up of the runtime.

24.09.2020

Quality update with minor improvements and bug fixes, including fix for problems with firmware version 03.04.10 (16).

Includes the following Security fixes: 2020-05

22.07.2020

Main update with various improvements and bug fixes. The CODESYS Gateway is no longer included in the runtime. A separate gateway is offered with the CODESYS Edge Gateway.

Includes the following Security fixes: 2019-08, 2019-10, 2020-01, 2020-02, 2020-03, 2020-04

05.05.2020

Quality update with minor improvements and bug fixes.

Includes the following Security fixes: 2020-02, 2020-03

25.03.2020

Quality update with minor improvements and bug fixes.

Includes the following Security fixes: 2020-01

23.01.2020

Quality update with minor improvements and bug fixes.

Includes the following Security fixes: 2019-10

19.11.2019
  • Support of WAGO firmware version 03.00.35(12)
  • General runtime improvements and bug fixes

Includes the following Security fixes: 2019-01, 2019-02, 2019-03, 2019-04, 2019-06, 2019-07

29.07.2019

Quality update with minor improvements and bug fixes.

23.08.2019

Quality update with minor improvements and bug fixes.

24.06.2019

Includes the following Security fixes: 2019-02, 2019-03

18.04.2019
Security update:
20.02.2019
17.12.2018
Security update:
18.01.2019
Security update:
23.10.2018
Security update:
  • Fix in CmpFileTransfer, with possible access of unauthorized file access to all system files
  • Fix in CmpWebServer, with possible run out of file descriptors
  • Fix in CmpOpenSSL, with an update to OpenSSL 1.0.2o
10.07.2018
Security update:
13.11.2018

-

24.05.2018
27.04.2018

-

26.02.2018
 - 20.12.2017
Beside other fixes this is a security update which solves the issues noted in Advisories 2018-04 and 2018-05.
For more details see:
20.04.2018
Beside other fixes this is a security update which solves the issue noted in Advisory 2017-09.
For more details see:
16.02.2018
 - 21.09.2017
 - 22.08.2017
 - 17.07.2017