Product Description

Licensing:

Single Device License

CODESYS Control for WAGO Touch Panels 600 SL is a SoftPLC-based on CODESYS V3 for the WAGO Touch Panels 600 series. After installation of the runtime environment, the PLC can be engineered with the CODESYS Development System (V3).

Detailed information about commissioning of the PLC can be found in the CODESYS Online Help.

Benefits

Fully-adapted CODESYS runtime system for WAGO Touch Panels 600 series (https://www.wago.com/de/)
Suitable for PLC tasks with higher performance requirements
Comprehensive engineering solution with the free CODESYS Development System (V3), extensible by add-ons from the CODESYS Store

Performance

CODESYS Multicore is included as full version in the delivery of the runtime package.

Communication

CODESYS OPC UA Server is included as full version in the delivery of the runtime package.

Visualization

CODESYS WebVisu is included as full version in the delivery of the runtime package.

Fieldbus

Teh following fieldbuses are included as full version in the delivery of the runtime package:

CODESYS CANopen Manager / Device
CODESYS EtherCAT Master
CODESYS EtherNet/IP Scanner / Adapter
CODESYS J1939
CODESYS Modbus TCP Master / Slave
CODESYS Modbus Serial Master / Slave
CODESYS PROFINET Controller / Device

Product options

Additonal products can be licensed for a fee:

CODESYS BACnet SL
CODESYS KNX SL
CODESYS Redundancy SL

Requirements

Programming System	CODESYS Development System V3.5.17.0 or higher
Runtime System	CODESYS Control V4.1.0.0 based on CODESYS Runtime Toolkit V3.5.17.0
Supported Platforms/ Devices	WAGO Touch Panels 600 Note: Use the tool “Device Reader” to find out the supported features of your device (free of charge component of CODESYS Development System).
Additional Requirements	See license agreement. After installation, the user is responsible for implementing and checking the functionality of the combination of the software package and hardware according to device specifications. Minimun WAGO firmware version 03.03.10(15) Dynamic libraries needed by the CODESYS Control Runtime binary: libm.so.6 libpthread.so.0 libdl.so.2 librt.so.1 libc.so.6 libgcc_s.so.1 libdbus-glib-1.so.2 libdbuskbuscommon.so.0 libffi.so.6 libglib-2.0.so.0 liblibloader.so.0 libnvram.so.0 libuio.so.0 liboms.so libtypelabel.so libdiagnostic.so
Restrictions
Licensing	Single Device License: The license can be used on the target device/PLC on which the CODESYS Runtime System is installed. Licenses are activated on a software-based license container (soft container), which is permanently connected to the controller. Alternatively the license can be stored on a CODESYS Key (USB-Dongle). By replugging the CODESYS Key, the license can be used on any other controller Note: In demo mode, the software runs for two hours without a license. After that, a manual restart is required.
Required Accessories	Optional: CODESYS Key

Support

Technical support is not included with this product. To get technical support please purchase a Support Ticket.

A list of alternative support resources can be found at the support section of the CODESYS Group web page.

Supplier

CODESYS GmbH

A member of the CODESYS Group

Memminger Straße 151
D-87439 Kempten
Germany

Additional Downloads

Versions

Version History

Version	Release Notes	Release Date
4.1.0.0	Main update with various improvements and bug fixes. Important Note To fix problems with installation of this software update start and use the CODESYS Installer (part of the CODESYS Development System setup v3.5.17.0) for package management. New Features and Improvements Update to CODESYS Runtime Toolkit V3.5.17.0 OPC UA Server extension for support of user-defined information models (OPC UA Companion Specifications) Support of OPC UA methods and alarms & conditions New service for management of runtime backups and updates Activation of runtime user management by default, also see CODESYS Online Hilfe Integration of “CODESYS Edge Gateway” as package dependency New runtime options: CODESYS KNX SL and CODESYS BACnet SL (additional license required) Compatiblity information The “main configuration file” (CODESYSControl.cfg) are now marked as “writeprotected”. New and changed values will be written to the “user configuration file” (CODESYSControl_User.cfg). CODESYS SoftMotion is no longer supported as runtime option. Known limitations “PLC load watchdog” might not work as espected: the plc load watchdog will detect (e.g. an endless loop) but the IEC task might not be stopped in any case. This might lead to a complete stop of the runtime process. As workaround and improve “hardening” of your IEC application we recommend to use an IEC Task watchdog on all your relevant IEC tasks in your IEC application. Includes the following Security fixes: 2020-05, 2021-01	16.06.2021
4.0.0.0	Quality update with minor improvements and bug fixes. Includes support of local IOs.	04.12.2020
3.5.16.20	Quality update with minor improvements and bug fixes.	24.09.2020
3.5.16.10	Quality update with minor improvements and bug fixes. Includes the following Security fixes: 2020-05	22.07.2020
3.5.16.0	Main update with various improvements and bug fixes. Includes the following Security fixes: 2019-08, 2019-10, 2020-01, 2020-02, 2020-03, 2020-04	06.05.2020

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account