CODESYS Control for Raspberry Pi SL

CODESYS Control for Raspberry Pi SL is an adapted CODESYS Control runtime system for Raspberry Pi.
Without purchasing a license (just download) the CODESYS Control for Raspberry Pi runs for two hours without functional limitations and shuts down automatically (demo).

Version: 
3.5.10.20  
Order number: 
2302000009
€50.00 plus VAT

CODESYS Control for Raspberry Pi SL

CODESYS Control for Raspberry Pi SL

CODESYS Control for Raspberry Pi SL contains a CODESYS Control application for Raspberry Pi (see http://www.raspberrypi.org/) as well as driver support for the extension modules Raspberry PiFace Digital, Raspberry Pi Camera and several devices/breakouts with I²C communication interface.
The recommended operating system "Raspian" can be downloaded here: https://www.raspberrypi.org/downloads/

This product can be installed via CODESYS Update Manager on a Linux distribution Raspbian. After each restart the runtime system will be started automatically. If no valid full license can be found, CODESYS Control runs for two hours without functional limitations before shut down.
This product supports the following functionalities
-    CODESYS EtherCAT Master
-    CODESYS Profinet Master
-    CODESYS Modbus TCP Master / Slave
-    CODESYS Modbus RTU Master / Slave (serial interface must be supported by and installed in the OS)
-    CODESYS WebVisu
-    CODESYS SoftMotion CNC
-    CODESYS OPC/UA Server
-    CANopen via EL6751 Gateway
-    CODESYS EtherNet/IP Scanner / Adapter

 

This product consists of:

-    License key, to be installed via the CODESYS Development System on the Raspberry Pi (see document "First Steps", Chapter 2.2)
-    Debian package with CODESYS Control for Raspberry Pi
-    CODESYS Plugin to install and update the package on a Raspberry Pi
-    CODESYS device description files for Raspberry Pi, Raspberry PiFace Digital, Raspberry PiFace Control&Display, Raspberry Pi Camera, several           
     devices/breakouts with I²C (SRF02, Adafruit PWM, MPU6050, MPU9150, AK8975), SPI (MCP3008, MCP23S17) or 1-wire (DS18B20) communication interface


The runtime system does not have real-time behavior. Its Jitter depends on many factors, especially on parallel executed Linux applications, and is ideally approximately 50 µs – with maximum values of approximately 400µs.
This product offers amongst other things the possibility to plug and control additional devices via SPI, I²C or 1-wire.
The product can be licensed on a software base (the license container is part of the CODESYS Control for Raspberry Pi SL) or via the CODESYS Runtime Key (not part of the product range).
The complete installation is described in the document "First Steps" (part of the CODESYS Package)



Collapse

Programming System

CODESYS Development System V3.5.6.0 or later

Target System

-

Supported Platforms / Devices

Raspberry Pi

CODESYS

- Pi Model B / B+
- Pi2 Model B

V3.5.8.0 or later

Pi3 Model B

V3.5.9.10 or later

Additional Requirements

-

Restrictions

This product is intended for testing and teaching purposes. Use for industrial purposes is not recommended.

Licensing

Runtime activation via CODESYS Runtime key or CODESYS Soft Container (part of this product)

Required Accessory

SD-card (minimum 4GB)

Version history

Version Release date
3.5.10.20 16.03.2017
3.5.10.0 15.12.2016

Items 1 to 5 from 75

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 15
Bin glücklich mit Codesys Review by chrigi75
Functionality
Quality
Fehlt nur noch die Implementation mit Maxon CANopen und Ethercat Motion-Systemen! Bitte unbedingt einbauen. Danke.

EPOS 2 etc... (Posted on 02/03/2017)
Buona Review by Green4tech srl
Functionality
Quality
Il Prodotto presenta buone caratteristiche di funzionamento (Posted on 28/02/2017)
Sehr übersichtlich Review by Tiff1112
Functionality
Quality
Man findet sich sehr gut zurecht, auch bei gelegentlicher Nutzung (Posted on 20/02/2017)
So macht der Einstieg in CODESYS 3 und Raspi Spaß Review by em-automation@t-online.de
Functionality
Quality
Ich bin begeistert. Da hat sich jemand richtig und sehr erfolgreich Mühe gegeben. Ich habe mir einen Raspi zugelegt um das CODESYS 3 kennen zu lernen. Durch die Beispiele (GPIO und Webvisu), die ich mir bisher angeschaut habe, hat der Start super geklappt. Ich werde sicher noch mehr davon einsetzen. (Posted on 19/02/2017)
very good Review by aqunaibi
Functionality
Quality
very good, but if we can create reports and print from webvisu (Posted on 19/02/2017)

3S-Smart Software Solutions GmbH

Memminger Straße 151

87439 Kempten

Germany

Phone.: +49 831 54031 66

support@codesys.com

You may also be interested in the following product(s)

CODESYS Test Manager

CODESYS Test Manager

€1,500.00 plus VAT
Add to My Wishlist
CODESYS Control RTE SL

CODESYS Control RTE SL

from €504.00

Add to My Wishlist
CODESYS Control for PFC200 SL

CODESYS Control for PFC200 SL

€100.00 plus VAT
Add to My Wishlist

Screenshots